Water Vapour Mass In Dry - Vevor Ri-160Dc Bedienungsanleitung

5. Things to note
1)During the transportation of the machine, the tilt is not allowed to exceed
45 degrees.
2)The power supply voltage requires rated voltage and must be reliably
grounded; it cannot share the same socket with other electrical appliances.
3)There should be enough space of more than 200mm on the side of the
inlet and outlet air grille to ensure heat dissipation of the machine.
4)Dust the machine condenser regularly, and the interval should not
exceed 3 months
5)When the machine is working, do not touch your hands directly with the
refrigerant to prevent frostbite.
6)Do not use the machine directly in a place exposed to direct sunlight, as
it will directly affect the cooling effect.
7)After use, unplug the power supply and clean the machine. The surface
can be wiped with a wet towel; it is strictly forbidden to rinse it directly with
water.
8)If the machine malfunctions and alarms, please contact a professional to
find out the cause before using it.
9)The maximum loading of each type of shelf is 8kg.
The ambient temperature and humidity conditions of the show case climate
class following the tab below
Test room
climate
class
0
1
8
2
3
4
6
5
Dry bulb
temperature
℃
20
16
23.9
22
25
30
27
40
Relative
Humidity %
50
80
55
65
60
55
70
40
- 5 -
Dew
point ℃ mass in dry
9.3
12.6
14.3
15.2
16.7
20.0
21.1
23.9
Water
vapour
air g/kg
7.3
9.1
10.2
10.8
12.0
14.8
15.8
18.8