Installation - Rivit Riv943 Benutzerhandbuch

SAFETY
Identification/Serial number
Model and serial number
etched in the outer casing

INSTALLATION

Transport and handling
The tool can be transported by hand and it is advisable to store it in its packaging after use.
Correct use of the case guarantees safe transport.
Damage to the tool caused during Transport and Handling,
are not covered by WARRANTY.
Repairs or replacement of damaged parts are the responsibility of the Customer.
Storage
In the event of prolonged inactivity, the tool must be stored with precautions regarding storage place
and time:
• Store the Tool in a closed place.
• Protect the machine from impacts and stress, using the appropriate case.
• Protect the Tool from humidity and high temperature fluctuations.
• Prevent the Tool from coming into contact with corrosive substances.
Connections
In order to avoid any problems when starting up the tool, it is best to follow the instructions below.
Pneumatic
Connection to the pneumatic network is made with a hose
to be connected to the articulated coupling supplied
with the tool.
The hose must be sufficiently flexible and meet the safety
requirements for pressurised products.
REV | 01
RIV943
Adhesive label indicating the
tool model, the name of the
manufacturer and the EC
marking
Air connection
1/4 GAS
EN
17