Spokey RINO+ Handbuch Seite 9

SHIPPING AND MAINTENANCE
RINO electric scooter requires the user to do routine maintenance.
This chapter describes maintenance steps and important operating tips.
Before you perform the following operations, ensure the power and charging cable are disconnected. If the battery is charging, the
operation is not allowed.
Clean RINO electric scooter
• Disconnect the charger and turn off RINO electric scooter.
• Wipe the cover.
• Avoid using water or other liquids on the RINO electric scooter for cleaning. If water or other liquids seep into RINO electric scooter, it
will cause permanent damage to the internal electronics.
Store RINO electric scooter
• Always power off the switch whenever the scooter is not in use.
• Fully charge your battery before storing.
• If you store RINO electric scooter more than one month, please charge it at least every three months.
• If the storage ambient temperature is below O0C, please do not charge. You can bring the RINO electric scooter into a warm
environment (above 10 O0C) for charging.
• To prevent dust from entering the RINO electric scooter, you should cover your RINO electric scooter.
• Store RINO electric scooter indoors in a dry and suitable temperature. If you do not use it for a long time, please do not connect the
power.
Maintenance
• Check that all parts are sufficiently tightened and the handlebar is securely fixed.
• All nuts and bolts may lose their tightness over time, please check the tightness of all nuts and bolts every time you ride.
• The wheels and wheel bearings may become worn out with natural wear and tear over time. Please check the condition of the
wheels and bearings regularly and replace them when necessary. Please contact the place of purchase for new wheels.
• Do not use attachments not included with the scooter. Do not attempt to make any modifications to the scooter by yourself.
NOTE: The battery WARRANTY is valid for 6 months from the date of purchase, provided it is used properly
CERTIFICATIONS
Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries
and accumula- tors and waste batteries and accumulators. The Directive determines the framework for the return and recycling
of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries
to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive.
In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate that they are
to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal
concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose
of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the re-
turn, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects
of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances.
MANUAL TRANSLATED FROM THE ORIGINAL.
www.spokey.eu
EN
9