OPERATING INSTRUCTION
EN
SANDWICH MAKER ST150
GENERAL DESCRIPTION
1. Indicator lights A and B
2. Lid
3. Heating plate
4. Handle
5. Interlock handle
TECHNICAL DATA
power: 1400W
-
peak power: 2300W
-
-
mains voltage: 220-240V~ 50-60Hz
SETTING UP THE APPLIANCE
•
Before using the appliance, make sure that the appliance, the plug and the power cable are
in good technical order and whether all parts of the package were removed.
•
Before the first use, all parts of the appliance that are in contact with food must be
thoroughly washed (see: Cleaning and maintenance).
•
Specific smell may be sensed during the first use, which results from the production
process. It is a normal process and it will go away after a time. Ensure the proper ventilation
in the room, e.g. opening the window.
•
The first use of the appliance should be without products.
USE
•
Place the device on a flat, stable and heat-resistant surface.
•
Wipe the heating plates (3) with a damp cloth and grease them.
•
Lower the cover (2).
•
Connect the device to the mains. The indicator light (1A and 1B) will come on.
•
The device is warming up. The indicator light (1B) goes out when the device has reached
the required temperature.
•
Open the lid by the handle (4). Arrange the products and lower the lid.
10
1
5
2
B
A
3
4