Chunghop RM-88E Bedienungsanleitung Seite 4

Search For the Correct Code
In case that your VCD machine cannot be remotely controlled after all the codes available
are tried, or in case that your VCD machine is the brand that has no matching code in the
"code list" , you may try the following steps:
1.Manually switch on the VCD machine that you desire to control and insert one compact
disk, making the machine in the idle status.
Notice: When turn on your VCD, if it is automatically playing, please press the
"pause" key of your VCD to stop it.
2.Aim the remote controller at the VCD machine. Press and hold the "Setting" button at
first, then press the "VCD" button. At this time, the indicator light illuminates. Then
release both buttons.
3.Press the "Play" button on the remote controller and release it to observe whether the
VCD machine plays. Repeat the operation till the VCD machine plays, and then press
the "Setting" button. А
Note: Each press of the "Play" button will lead to one code emission. If the code is
identifiable by the VCD machine, the VCD machine will play.
4.At this time, the indicator light extinguishes, and the setting ends. You can check other
functional buttons, for example, "Exit" to ensure that they work well.
5.In case other buttons fail to work properly, a resetting started from Step 2 shall commence
till the correct code is found.
Note: After each press of "Play" button, the code number of the remote controller will
add 1 and the "Play" code under the code will be emitted once. In case a normal
control still cannot be obtained, please refer to the "Problem Solving"
Setting Steps for DVD Machine
Manual Setting
1.Find out the 3-digit code for the DVD machine
that you desire to control from the "code list" . Pressiand hold «Search code
In case there are several groups of codes the "Setting" y
available, please use the first group at first; button, then
2.Press and hold the "Setting" button at first, press the Setting) + | DVD
then press the "DVD" button. Release both "DVD" button.
buttons after the indicator light illuminates, Indicator light illuminates
indicating the status of code input;
3.Input sequentially the 3-digit code that you have Release both buttons
obtained. The indicator light flashes once when y
one digit is input. After the input of the code, the Input the
indicator light extinguishes; 3-digit code. 09 09 09
Note: In case the indicator light keeps illuminating y No
after two flashes, you only need to input the Indicator light extinguishes
correct 3-digit code and do not repeat Step 2, + Yes
otherwise a resetting started from Step 2 shall 5 Setting ends
commence.
4.When the indicator light extinguishes,the setting ends.Please test the remote control can work
normally or not,if not, reset it from step 1 and try next 3-digit code
Search For the Correct Code
In case that your DVD machine cannot be remotely controlled after all the codes available
are tried, or in case that your DVD machine is the brand that has no matching code in the
"code list" , you may try the following steps:
1.Manually switch on the DVD machine that you desire to control and insert one compact disk,
making the machine in the idle status.
Notice: When turn on your DVD, ifitis automatically playing, please press the
"pause" key of yourDVD to stop it.
2.Aim the remote controller at the DVD machine. Press and hold the "Setting" button at first,
then press the "DVD" button. At this time, the indicator light illuminates. Then release both
buttons.
3.Press the "Play" button on the remote controller and release it to observe whether the
DVD machine plays. Repeat the operation till the DVD machine plays, and then press the
"Setting" button.
Note: Each press of the "Play" button will lead to one code emission. If the code is
identifiable by the DVD machine, the DVD machine will play.
4.At this time, the indicator light extinguishes, and the setting ends. You can check other
functional buttons, for example, "Exit" to ensure that they work well.
5.In case other buttons fail to work properly, а resetting started from Step 2 shall commence ШІ
the correct code is found.
Note: After each press of "Play" button, the code number of the remote controller will add 1
and the "Play" code under the code will be emitted once. In case a normal control still
cannot be obtained, please refer to the "Problem Solving" .