Residual Risks; After Delivery - Eberth Gb2-R400 Bedienungsanleitung

Even if all relevant safety regulations are complied with and the intended use specified by
the manufacturer, there may be risks due to the design determined by the intended use.
Risks can be minimized if safety instructions, intended use and all instructions described in
the operating instructions are observed.
Residual risks manifest themselves through:
• Spiral can overturn (form a loop if the working sheet is too large)
there is a risk of jamming.
• Spiral can jump out of the tube under tension
there is a risk of injury!
• Before setting up the device, completely remove all packaging material from the
device.
• If you dispose of the packaging, observe the regulations in your country.
• Dispose of recyclable packaging materials for recycling.
• Please check that the device and equipment are complete.
• If any parts are missing, please contact our customer service.
• Please have information about customer number, invoice number and order number
ready.
Keep the packaging of your device. You may need the packaging for storage during the
warranty period. In case of damage, please contact our customer service.
8

Residual risks

After delivery

V. 1.0 DE