MAJORITY MP3 Pro Benutzerhandbuch Seite 9

Bluetooth
The Majority MP3 Pro can be paired via Bluetooth with earbuds or external speaker.
1. To pair the Majority MP3 Pro with a Bluetooth speaker or other sound output
device, follow these steps:
2. Select 'Bluetooth' from the Main Menu, and then press the 'OK' button to enter
(Ref.4).
3. Activate the Bluetooth connection on the Majority MP3 Pro by entering the
Bluetooth Switch Control and select 'Bluetooth Open'. Press the 'OK'/'Enter'
button (Ref.4) to confirm, and then press the 'Return'/'Back' button (Ref.7) to
return to the Bluetooth Menu.
4. Activate Bluetooth on your device, making sure yours is visible and ready to
pair. Enter 'Search for Device' in the Bluetooth Menu, and press the 'OK' button
(Ref.4) to start searching for devices to pair with. A flashing Bluetooth icon will
be visible on the screen next to the battery icon, indicating that the player is
searching for available devices around to pair with.
5. A list of devices found will then be displayed on the Majority MP3 PRO. Select
the one you would like to pair with, and then press the 'OK' button (Ref.4) to
confirm, match and connect. Wait a few seconds for the connection to be
established. Once successfully paired, the device will read 'Connected' on the
Majority MP3 Pro. You can now start playing music from the Majority MP3 Pro
via your Bluetooth audio output device.
If the connection fails, please try again these same steps as described at points 2,3,4.
To disconnect the Majority MP3 Pro from a paired device, remove from the 'Devices
List'.
To switch off Bluetooth on the Majority MP3 Pro, access the 'Bluetooth Switch Control'
and select 'Bluetooth OFF'.
Bluetooth
EN
9