Preparing For Operation - Bosch PFS 55 Originalbetriebsanleitung

22 | English
Assembly
Before any work on the machine itself, pull
the mains plug.
Mounting the Spray Gun and the Electri-
cal Unit (see figures A1
Connecting the Electrical Unit with the Spray
Gun
– Insert the spray gun 9 onto the electrical unit
1 until it can be heard to engage.
Removing the Electrical Unit
– Press and hold the two red SDS release but-
tons 4 and pull the spray gun 9 out of the
electrical unit.
Operation

Preparing for Operation

Spraying on the sides of water bodies
(lakes, rivers, etc.) or neighbouring surfac-
es in the direct catchment area is not per-
mitted.
When purchasing paint, varnish and spray mate-
rial, pay attention to their environmental com-
patibility.
Preparing the Spray Surface
Note: Cover off the vicinity of the spray surface
thoroughly and generously.
The spray mist contaminates the environment.
When spraying in enclosures, surfaces not cov-
ered can become contaminated.
The spray surface must be clean, dry and
grease-free.
– Roughen smooth surfaces and then remove
the sanding dust.
1 609 929 L54 | (18.2.08)
A2)
–
Diluting Spray Material
When diluting, pay attention that the spray
material and the diluting agent correspond.
When using a faulty diluting agent, lumps can
develop that can lead to clogging of the spray
gun.
Spray material
Wood preservatives, strip-
pers, oils, finishes
Disinfectants,
plant protectants
Solvent- or water-dilutable
paints, primers,
automobile spray paint,
thick-coat finishes
For spray material that needs to be diluted, pro-
ceed as follows:
– Take the measuring cup 22.
– Stir the spray material thoroughly.
– Fill a sufficient quantity of spray material into
the spray-material container 11. (siehe "Fill-
ing in Spray Material", Seite 23)
– Dilute the spray material by 10 % with paint
thinner. Examples:
Amount of spray
material [ml]
Paint thinner [ml]
– Stir the spray material thoroughly.
– Carry out a test-spray run on a test surface.
(see "Spraying", page 23)
When the spraying pattern is perfect, start the
spray job.
or
When the spraying result is not satisfactory or
when no paint comes out, please continue as
described under "Correction of Malfunctions"
on page 25.
Recommended
dilution
undiluted
undiluted
At least 10 %
diluted
200 300 400 500
20 30 40
Bosch Power Tools
50