Product Features; Technical Data; Declaration Of Conformity - Bosch PFS 55 Originalbetriebsanleitung

Product Features

The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Electrical unit
2 Cable clamp
3 Air filter cover
4 SDS release button
5 Mains cable
6 Handle extension
(only for 800 ml container)
7 Screw for air-filter cover
8 Air filter
9 Spray gun
10 Suction tube with container seal
11 Container for spray material, 600 ml
Container for spray material, 800 ml*
12 Vent cover
13 Air cap
14 Union nut
15 Thumbwheel for spraying capacity
16 Trigger switch
17 Venting hose
18 Venting valve
19 Membrane
20 Nozzle
21 Nozzle seal
22 Measuring cup
*The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools

Technical Data

Fine-spray System
Article number
Rated power input
Spraying capacity
Atomising output
Required time for 5 m
paint application
Container capacity for
spray material
Weight according to
EPTA-Procedure
01/2003
Protection class
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, Dept. PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
18.02.2008, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
English | 21
PFS 55
3 603 B06 0..
W
0 – 110
g/min
W
2
min
ml
kg
Dr. Eckerhard Strötgen
Head of Product
Certification
1 609 929 L54 | (18.2.08)
280
55
12
600
1.3
/ II