N8WERK V7 Bedienungsanleitung Seite 14

cable are damaged, they must be replaced or repaired by the
manufacturer, customer service department or an authorised
distributor in order to avoid any hazards.
■ It is essential to follow the instructions in the "Cleaning and
Storage" chapter.
DANGER – DANGER OF
ELECTRIC SHOCK
■ Use and store the device only in closed
rooms.
■ Never immerse the device and the
connecting cable in water or other
liquids and ensure that they cannot fall
into water or become wet.
■ If the device falls into water while it
is connected to the mains power, pull
the mains plug out of the plug socket
immediately. Only after this should
you retrieve the device from the water.
Never attempt to pull it out of the water
while it is connected to the mains
power! Have it checked in a specialist
workshop before using it again.
■ Never touch the device with wet hands
when it is connected to the mains
power.
WARNING – DANGER OF FIRE
■ Do not connect the device along with
other consumers (with a high wattage)
to a multiple socket in order to prevent
overloading and a possible short circuit
(fi re).
■ Do not use the device in conjunction
with extension cables.
■ Do not operate the device in the
vicinity of combustible material. Do not
place any combustible materials (e.g.
cardboard, paper, wood, plastic) in or
on the device.
■ Only use suitable vacuum fi lm!
■ Do not cover the device during
operation.
14
02811_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 14 02811_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 14
WARNING – DANGER OF
INJURY
■ Keep children and animals away
from the packaging material, vacuum
fi lm and small parts which could
be swallowed. There is a danger of
suffocation!
■ Do not touch the sealing strip shortly
after use. There is a danger of burns!
■ Make sure that the connecting cable
does not present a trip hazard. The
connecting cable may not hang down
from the surface on which the device
is placed in order to prevent the device
from being pulled down.
NOTICE – RISK OF DAMAGE TO
MATERIAL AND PROPERTY
■ Switch off the device and pull the
mains plug out of the plug socket if
an error occurs during operation or
before a thunderstorm. When you pull
the mains plug out of the plug socket,
always pull on the mains plug and
never the mains cable!
■ Never pull or carry the device by the
connecting cable.
■ Lay the connecting cable in such a way
that it does not become squashed or
bent and does not come into contact
with hot surfaces.
■ Protect the device from heat sources,
naked fl ames, sub-zero temperatures,
persistent moisture and impacts.
■ Keep the vacuum fi lm away from sharp
and pointed objects.
13.04.2021 10:39:15 13.04.2021 10:39:15