Unicaterm PLUS 9 Betriebsanleitung Seite 38

E N G
Similarly, press Menu when Save?? is displayed on the screen to set the shutdown time and the following
ignitions or shutdowns.
Press "WEEKLY PROGRAM" to select the programming day:
Caption on the
screen
1 Mo
2 Tu
3 We
4 Th
5 Fr
6 Sa
7 Su
Press + and – to scroll and select the day and then Menu to confirm. Program the days following the same
method used for "DAILY PROGRAM", making sure to include in the program the number and the time of
the interventions for each single day of the week. In case of mistakes during the programming operation,
press 0/1 to exit the program without saving.
Use a specific connection cable to turn the stove on or off through a remote device, such as a GSM phone
activator, a room thermostat, a confirmation from a home automation system, etc. For this type of
connection, please contact your Technical Assistance Service or your electrician, and tell them to use a
device with a volt-free contact according to the following:
The activation and the deactivation occur with a 10" delay from the transfer of the last command.
Even when the remote activation output is connected, it is still possible to turn the stove on and off from
the control panel; the stove will be activated according to the last order received, whether it is an ignition
or a shutdown.
WARNING: the activation of the internal time programmer (see weekly program settings) automatically
excludes the remote activation (Aux. output) to avoid conflicts with the activations programmed.
3 8
Corresponding No program
day of the week option
Monday
Tuesday
Press +/- to
Wednesday
select "Prog.
Thursday
No." and Menu
Friday
to confirm
Saturday
Sunday
6.0 REMOTE ACTIVATION FUNCTION (AUX output)
Open contact = stove is off
Closed contact = stove is on
Two ignitions
One ignition /
and two
One shutdown
shutdowns
option
option
Press +/- "Prog. Press +/- "Prog.
No. 1" and then No. 2" and then
Menu to confirm Menu to confirm
Three ignitions
and three
shutdowns
option
Press +/- "Prog.
No. 3" and then
Menu to confirm