cecotec Bean&Clean Bedienungsanleitung Seite 25

1. PARTS AND COMPONENTS
Fig. 1
1. Concave head: suitable for normal portafilters.
2. Head with right angle: suitable for bottomless portafilters.
3. Bristle brush head: ideal for thorough cleaning.
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and
other packaging elements in a safe place to prevent damage to the appliance if you need
to transport it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Portafilter cleaner
- 2 cleaning heads
- 1 brush head
- Instruction manual
- Do not remove the serial number of the appliance in order to keep a correct traceability of
it in case of assistance.
3. OPERATION
This portafilter cleaner consists of two parts that rotate synchronously. Each part is designed
to fit a cleaning head, allowing efficient and thorough cleaning of the portafilters.
1. Be sure to unplug the appliance from the mains.
2. Fit the appropriate cleaning head to each rotating part of the cleaner.
3. Plug the appliance.
ENGLISH
25
BEAN&CLEAN