Ronix RP-0101C Bedienungsanleitung Seite 18

ASSEMBLY
- Position the washer as NEAR as possible to the water supply.
- The washer must be used standing on a secure, stable, positioned as shown.
1. Installing the spray wand Fit the spray wand into the gun and rotate
it until the two parts are completely locked
2. Connect the high pressure hose to the trigger gun. Connect the sliver
end of the high-pressure hose to the trigger gun and twist the nut as
indicated to secure the connection.
3. Connect the high-pressure hose to the water outlet
Connect the other end of the high-pressure hose to the water outlet
on the washer and twist the black rotatable end-piece as indicated to
secure the connection.
4. Connect the garden hose to the water inlet
Connect the garden hose adaptor(female coupler) to the water inlet of
the pressure washer, then thread your garden hose(male end) into the
garden hose adaptor.
16
Compact Induction High Pressure Washer 100bar