Ronix RP-0101C Bedienungsanleitung Seite 17

other equipment (e.g. Blinking of a lamp). If the MAINS-IMPEDANCE
Zmax<0.335 OMH, such disturbances are not expected. (in case of
need, you may contact your local supply authority for further information.)
WARNING!
ELECTRICAL SHOCK HAZARD
Improper connection of the equipment – grounding conductor can result
in a risk of electrical shock. Check with a qualified electrician or service
person if you are unsure if an outlet is properly grounded. DO NOT
modify the plug provided with the appliance to fit an outlet, have a proper
outlet installed by a qualified electrician.
MAINS POWER CONNECTION
The following should be observed when connecting the high pressure
washer to the electric installation:
- The electric installation shall be made by a certified electrician and
comply with IEC 60364.
It is recommended that the electric supply to this appliance should
include either a residual current device that will interrupt the supply if
the leakage current to earth exceeds 30 mA for 30 ms.
IMPORTANT:
Only use water without any impurities. If there is a risk of running sands
in the inlet water (i.e. from your own well), an additional filter should be
mounted.
- Safety devices
- The unloader valve can reduce pressure if it exceeds preset values.
The spray gun features a looking device. When the pawl is activated,
the spray gun cannot be operated.
- Thermal sensor
A thermal sensor protects the motor against overloading. Machine will
restart after a few minutes when the thermal sensor has cooled.
15
User Manual