Mini Navigation Portable Schnellstartanleitung Seite 17

Mounting and connecting the MINI Navigation Portable
Mounting your device
This product contains a lithium-ion
!
battery. To prevent the possibility of
personal injury or product damage caused by
battery exposure to extreme heat, remove your
MINI Navigation Portable from the vehicle when
exiting or store it out of direct sunlight. 3
➊
1. Snap the cradle onto the mount arm
➊
2. Fit the bottom of your device into the
mount.
3. Tilt your device back until it snaps into place.
➋
.
➋
Connecting the device to vehicle
power
Charge your device before using it on battery
power.
1. Plug the vehicle power cable into the USB
connector on the back of the device.
➊
➊
2. After the device has been connected to
vehicle power, the following should occur.
• If your vehicle ignition is on, your
MINI Navigation Portable will turn on
automatically. Follow the on-screen
instructions.
• The device acquires satellite signals.
When at least one of the
green, your MINI Navigation Portable has
acquired satellite signals.
The device may need a clear view of
the sky to acquire satellite
signals. 3
• The device charges as you drive.
the status bar indicates the status of the
internal battery.
bars is
in
17