Filling Of Liquids - Changing The Atomizer Head - Innocigs Cuboid Mini Clearomizer Bedienungsanleitung

INNOCIGS CUBOID MINI CLEAROMIZER – USING THE DEVICE
Filling of Liquids
1. Remove the top cap of the clearomizer.
2. Fill the tank with liquid, taking care not to overfill.
3. Screw the top cap back onto the clearomizer and make sure that the
clearomizer is firmly closed.
Changing the Atomizer Head
1. Remove the top cap of the clearomizer.
2. Remove the atomizer coil.
3. Drip a few drops of liquid on the new atomizer coil.
4. Place the atomizer coil back into the top cap.
5. Screw the top cap back onto the clearomizer.
Please also follow the instructions on page 24.
26