EASYmaxx SJ9578 Gebrauchsanleitung Seite 2

Dear customer,
We are delighted that you have decided on purchasing this solar
light. If you have any questions, please contact customer service
via our website:
www.service-shopping.de
Proper use
❐ The product is suitable for decorating outdoor areas. The
storage battery of the solar unit charges during the daytime
via the solar cell fi eld. The accumulated energy allows the
LED light to illuminate in the dark.
❐ The product is designed for private use and is not intended
for commercial use. Only use the product as instructed. Any
other use is deemed improper. Store the instructions in a safe
place.
❐ Defects arising due to improper handling, damage or attempts
at repair are excluded from the warranty. This also applies to
normal wear and tear.
Important notes
❐ Attention! Danger of suffocation! Keep the packaging materi-
al away from children and animals.
❐ The product is not a toy! Keep children and animals away
from the product to avoid injury.
❐ Do not disassemble the product (except for removing the
storage battery prior to disposal of the solar unit). Only have
the product repaired by a qualifi ed workshop or by customer
service.
❐ If a storage battery has leaked, ensure that the battery acid
does not come into contact with your skin, eyes, and mucous
membranes. In case of contact with battery acid, rinse the af-
fected areas immediately with plenty of clean water and seek
immediate medical attention.
❐ Storage batteries may not be disassembled, disposed of in
fi re, immersed in liquids or short circuited.
❐ Do not allow the product to fall and do not subject it to severe
percussions.
❐ Do not use the product if it exhibits damages.
❐ Never submerge the product in water or other liquids! It is
only splash-proof.
❐ Do not subject the product to continual rainfall to prevent the
formation of rust.
❐ In the event of extreme weather conditions (e.g. storm, hail)
or if you do not intend to use the product for a prolonged pe-
riod of time, turn it off and store it in a dry place.
❐ To enable an automatic activation of the LED light the product
should not be situated near other light sources such as street
lamps or other lamps.
❐ Ensure that the solar fi eld is always clean in order to ensure
the greatest possible collection of light. Therefore, clean it oc-
casionally with a damp cloth.
❐ Do not use corrosive or abrasive cleaning products to
clean the product! They could damage the surface.
Product contents
• 1 x windmill solar light
• 2 x windmill vanes
• 1 x screw cap
• 1 x spacer
• 1 x vane lock
• 1 x Ni-MH storage battery, type AAA, 600 mAh
Start-up
The storage battery of the solar unit must charge for
approximately 6 to 8 hours in order for the LED light to
illuminate.
09387_DE-GB-FR-NL_A4_V0.indb 2 09387_DE-GB-FR-NL_A4_V0.indb 2
Operating instructions
Product number Z 09387
1. Unpack the product contents and remove any protective foils
(e.g. from the solar fi eld) or stickers. Check all parts for any
damages from transport. Should you identify any transport
damages, please promptly consult customer service.
D
5. Position the solar light so that it is able to absorb direct sun-
light the whole day preferably (ideally in an open area, not
under trees etc.). Make sure that the solar light does not pose
a tripping hazard.
6. The ON/OFF switch is located on the bottom side of the solar unit.
Push it once to set it to the ON position and to activate the solar unit:
Sunlight will now charge the storage battery of the solar unit.
At dusk, the light will automatically turn on. At dawn, the light
will turn off and the storage battery will be recharged via the
solar fi eld.
7. Push the ON/OFF switch again to turn off the solar unit.
Technical data
Product number: Z 09387
Model number:
Power supply:
Storage battery
charging time:
Lighting time:
Disposal
The packaging material is recyclable. Dispose of the
packaging in an environmentally-friendly manner and
make it available to the collection service for recyclable
materials.
Dispose of the product in an environmentally-friendly
manner. The product does not belong in the household
garbage. Dispose of it at a recycling centre for old elec-
tric and electronic equipment. For more information,
please contact the administration in your community.
Batteries and storage batteries must be removed and
disposed of separately before disposing of the product.
To protect the environment, batteries and storage batter-
ies may not be disposed of together with normal house-
hold waste. Instead they must be turned in at appropri-
ate collection points. Be sure to observe applicable legal
regulations on battery disposal.
Removing the storage battery
Loosen the screws on the bottom of the solar unit. Af-
terwards, you can carefully remove the storage battery.
Customer service / importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 (0) 38851 314650 *)
*) Calls subject to a charge.
As part of ongoing development, we reserve the right to alter products, pack-
aging or enclosed documentation at any time.
2. Place the spacer (D) on the vane
receptacle of the solar light.
3. Put the vanes (A) on the spacer
A
so that the recesses fi t the quad-
rangle and that the vanes form a
cross.
B
4. Put the vane lock (B) on the vane
receptacle and mount the protec-
tive cap (C) on it afterwards.
C
SJ9578
1.2 V DC (1x Ni-MH storage battery, type AAA,
600 mAh)
approx. 6–8 hours (in sunlight)
up to 8 hours (with a fully charged battery)
GB
Z 09387_V0
03.11.2014 08:23:37 03.11.2014 08:23:37