Cleaning And Maintenance - Siguro Sgr-Hs-R450B Bedienungsanleitung

Adding Your Device
1. Turn on the heater.
2. In the app, click on the "+" icon (top right corner) and select "Add Device".
3. On the next screen, select "Small Appliances", then "Heater (Wi-Fi)".
4. You will be prompted to select a WiFi network and enter your password.
5. On the next screen, you will be prompted to reset the Wi-Fi. Press and hold
for 5 seconds.
6. Then check that the Wi-Fi light is blinking.
7. This will start pairing the heater with your phone and add the fan to your device
list.
8. Once you can see the heater in the device list, tap its icon to show the control
interface. Commands include power on / standby, mode selection, timer settings,
and more.
Note:
If the fan fails to automatically add itself to the device list within 3 min-
utes, you will need to start the pairing process from the beginning and
reset the Wi-Fi again.

CLEANING AND MAINTENANCE

Always switch off the appliance, disconnect the plug from the mains socket and
allow it to cool completely before cleaning or carrying out any maintenance.
Warning:
Never immerse the appliance, the power cord or the plug in water or
other liquid.
Do not use plastic or metal scrapers, harsh cleaners, chemicals, petrol, solvents or
other similar substances to clean any parts of the appliance. The surface finish could
be seriously damaged.
Outer surface
Wipe the outside of the heater with a soft towel, dampened in warm water. Wipe dry
with a clean cloth. Make sure that no water or other liquid enters the interior.
Storage
Before storing, make sure that the appliance and its accessories are cool and clean.
Store the appliance and its accessories in a dry and well-ventilated place out of the
reach of children or pets.
Do not place any objects on the appliance.
Hereby, Alza.cz a.s. declares that the type of radio equipment SGR-HS-R450B is in
compliance with Directive 2014/53 / EU.
EN - 13
EN