Werbung
2.Manually turn the anchor nuts clockwise to fasten up. Ensure that the front wheel is located at the very center of the front fork and
that the disc brake rotor is parallel to the disc brake caliper towards the end of the front fork with space in between. Keep some space
on both sides, and tighten into place with a spanner as indicated below.
1 /8 turn
ata
time
3. Fasten Quick Release
Whiling holding the fork leg, press the quick release until it is fastened. The word "CLOSE" printed on the quick release should be
facing outside. Quick release should be located in front of fork, and make sure it is parallel with the fork as the image shown below.
Display
See
below
meter
screen:
go
Werbung
