Inhaltsverzeichnis
Werbung
10. IP und RS232 Protokoll
Die Kommunikation kann über TCP/IP und RS232 erfolgen.
Supports communication via TCP/IP and RS232.
Voreingestellt / Default: TCP Port 60001; RS232 Baudrate = 115200 bd, 8 1 N
Command
Video
Route
Command
Query Video
Route
Command
EDID Copy
Command
Video Preset
Save Command
HDBaseT –
Serial Transmit Command
HDBaseT -
Serial Receive Command
- IP and RS232 protocol
String
>Cxtoz<CR>
x= 1-8, z=1-8
For more than one port number
use a comma to separate.
X= 0 is for "close" port
#C<CR>
>Extoz<CR>
X= 1-8, Z= 1-8
For more than one port number
use a comma to separate.
>SX<CR>
X= 1-32
>CSa,bT@xxx<CR>
a,b= 1-8, for more than one port
use a comma to separate.
xxxx= ASCII: string
(0<length<100)
>CSa,bT&xxx<CR>
a,b= 1-8, for more than one port
use a comma to separate.
xxxx= HEX: string (0<length<100)
<CSaTxxxxxxxx<CR>
a= 1-8, for more than one port use
a comma to separate.
XXXXXXX: HDBaseT Serial
channel receive Command
(0<length<100)
Example
send: >C1to2,3,4,5<CR>
response: <C1to2,3,4,5<CR>
Route Input 1 to output 2, 3, 4
and 5.
send: #C<CR>
response:
<C1to2,1to3,1to4,1to5<CR>
Input 1 to output 2, 3, 4 and 5.
send: >E1to2,3,4,5<CR>
response: <E1to2[ok]<CR>
<E1to3[ok]<CR>
<E1to4[ok]<CR> <E1to5[ok]<CR>
Copy 1 output EDID to input 2,
3, 4, 5.
send: >S30<CR>
response: <S30<CR>
Save current video configuration
into preset 30.
send: >CS1,2,3T@Hello<CR>
response: <CS1,2,3T@Hello<CR>
System sends 'Hello' in ASCII to
HDBaseT input ports 1, 2, 3 and
send to HDBaseT transmitter.
send: >CS1,2,3T&30 31 32 3A 41
0D<CR>
response: CS1,2,3T&30 31 32 3A
41 0D
System sends '012:A<CR>' in
ASCII to input ports 1, 2, 3 and
send to HDBaseT transmitter.
Channel 8 receive: hello
response: <CS8THello<CR>
Is used to receive RS232
commands from HDBaseT - card
23
Werbung
Inhaltsverzeichnis
