Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting
Problem
EN
Rotor don't move
Rotor stops sud-
denly, helicopter
chrashes
The helicopter
does not react to
the remote control.
Loss of control.
Repairs, Spare Parts
Normal wear and defective parts that result from an accident, are excluded from the guarantee. These in-
clude in particular:
For car models: bald tires, worn parts and drive gears, or bent / broken suspension, chassis or bodywork
For ship models: damaged or broken propellers, torn superstructure
For airplanes: damage due to improper transportation or crash
I If you find a part that is defective in material or workmanship right after opening the package, return - before
you used it – to your dealer or directly to us and we will send you a replacement.
For the Flybar 400E some parts are available as spares. If a part is defective or worn, you can identify it with
the help of the exploded view.
In case of problems or questions, please contact your dealer or:
XciteRC Modellbau GmbH & Co. KG - Service, Autenbachstrasse 12, D-73035 Göppingen, Phone +49 7161
40 799 50
Email: service@xciterc.de
Spare parts for the XciteRC FLYBAR 400E you may order in your local hobby shop or online at http://www.
XciteRC.com/
Specifications
Lenght x Width x Height 438 x 80 x 151 mm
Rotor diameter
Weight
Battery
Remote Control
20
Possible Cause
ON/OFF switch is OFF
Weak helicopter battery
Transmitter - model not bound
Weak helicopter battery
Weak transmitter battery
Gyro initialisation failure
Another radio controlled device using
the same channel
400 mm
238 g (incl. battery)
7.4 V / 700 mAh LiPo
2.4 GHz 4-channel
Troubleshooting · Repairs · Specifications
Corrective Action
Switch ON helicopter
Re-charge battery
Rebind: first switch on the model, then the
transmitter
Re-charge battery
Change transmitter batteries
Place the model on a flat surface when
switching on
Switch off another/own device or move to
another spot
XciteRC Flybar 400E Easy
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
