•
If you connected the Line-out Jack on your external device then you only
need to adjust the volume control of this system. If you connected the
Headphone Jack of your external device then you may need to adjust both
the volume control of your external device and the volume control of this
system to find the most desirable volume setting.
•
Remove the audio cable from AUX IN JACK (#25) when you finish
listening. Don't forget to switch off the power on your external device as
well.
Playing a tape:
Check the following items before starting operation.
•
Use Type I (normal) tapes only. Type II (high position), Type III (ferro-
chrome) and Type IV (metal) tapes are not supported.
•
If there is tape slack, rewind the slack using a pencil to avoid
damaging the tape or the unit
1. Press
, insert a cassette tape into the cassette tape compartment (#20)
and then close the compartment cover.
2. Press
to start playback.
Other operations:
To
Stop playback
Pause playback
Fast-forward or rewind
Eject the cassette
Do this
Press
Press
, To resume playback,
press the button again
Press
or
Press