Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PROGRAM PLAY MODE
User can program up to 25 tracks in CD mode or 99 tracks in MP3 in any desired
order.
This function allows music tracks to be played in a programmed sequence.
Program can only be set in STOP mode.
1. Press the PROGRAM BUTTON (#8) once. The program number 01 and the
PROGRAM INDICATOR (#15) both will flash.
2. Tap the SKIP + BUTTON (#18) or SKIP - BUTTON (#17) to select the
track to be programmed.
3. Press the PROGRAM BUTTON (#8) again to store the selection. The program
number will advance to 02 and flash to prompt for the next input.
4. You may repeat steps 2 to 3 to program up to 25 tracks in CD mode or 99 tracks
in MP3. As soon as you have entered the 25th/99th track, the LED DISPLAY
(#12) will automatically show the programmed tracks one by one in their correct
sequence starting from the first. At the end of program review, program number
01 and the PROGRAM INDICATOR (#15) will both flash.
5. Press the PLAY/PAUSE
The PROGRAM INDICATOR (#15) will light up. Press the STOP BUTTON
(#16) to stop.
6. Normally all the programmed tracks will be played through once and then stop.
However, you may use the REPEAT function to repeatedly play a certain track
(Repeat 1) or all tracks (Repeat All) in the program. You may also tap the SKIP
+ BUTTON (#18) to go directly to other tracks ahead or the SKIP -
BUTTON (#17) to go back to previous track(s) during program play.
7. To edit the programmed tracks during program playback, press the STOP
BUTTON (#16) and then the PROGRAM BUTTON (#8). Program number 01 on
the LED DISPLAY (#12) and PROGRAM INDICATOR (#15) will both flash.
a. If you do not want to change any track in the program, press the STOP
BUTTON (#16).
b. To edit a programmed track, tap the PROGRAM BUTTON (#8) repeatedly
until you reach the program number whose track you want to change. Tap
the SKIP + BUTTON (#18) or SKIP - BUTTON (#17) to select a new
track and press PROGRAM BUTTON (#8) to confirm.
8. To cancel program play, press the STOP BUTTON (#16) twice while program
playback is running or open the CD DOOR in stop mode. The PROGRAM
INDICATOR (#15) will go off.
BUTTON (#9) to complete and start program play.
Werbung
