AmazonBasics B0753PM57V Kurzanleitung Seite 4

Maintenance
1. Vlsual inspection must be made before using the stands. Check for cracked
welds and missng and/or damaged parts. A stand that appears to be
damaged must be removed from sen,rice immediately
2. Do not use Jack Stands as a long-term stand for a vehicle. Use them only
while making repairs, then immediately ower vehicle to the ground.
Safety and Compliance
WARNING:
Study, understand, and follow all instructions before operating this device.
• Use as a matched pair only.
• Maximum load capacity per matched pair shall not exceed the rated capacity
of the individual
• Use stands to support one end of a vehicle only.
O
• Use only on a hard, level surface.
• Center oad
• Failure to heed these markings may result in personal injury and/or property
damage.
• No alterations shall be made to this product other than the one explicitly
indicated below (bending the tab).
z
4
& Inspection
stand.
on saddle.