Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Welcome Guide • English
For Your Safety
Please read these instructions
Operation
1. Refer to your vehicle owner's manual for proper jacking lift point. This area of
the vehicle is specified by vehicle manufacturer.
2. Position stands under vehicle at points specified by vehicle manufacturer as
proper load support points.
3. To adjust stands hold control lever up while lifting saddle shaft to desired
height. Push control lever down to lock pawl into teeth ocated in center
column. Make sure pawl is fully engaged into teeth.
4. Carefully lower load onto stands. Set both Jack Stands to the same height.
carefully and retain them for future use.
Saddle
Center
Column
Pawl
Control
Lever
0
0
z
3
Werbung
