Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Foreword
This manual includes basic information for the safe assembly, operations
and maintenance of the RG-1&2 Universal Roller Guide. This manual
assumes that the operator (user) is qualified to perform the tasks specified
herein and is qualified to operate the product with the intended machines
safely. This document does not address safety procedures for any
unintended use of this tool. The operator must carefully read and
understand the contents of this manual before using the tool. Improper
installation, assembly or operation of this tool may negate the safety feature
designs of the tool. Please retain this manual for future reference.
2. Warranty Information
Limited Tool Warranty:
We make every effort to ensure that this product meets the highest quality
and durability standards. We warrant that this product is free from
manufacturing defects for two years under the terms of a limited warranty.
The two-year term begins at the time of the retail purchase. This warranty
does not apply to defects due directly or indirectly to misuse, abuse, normal
wear and tear, negligence or accidents, repairs done by an unauthorized
service center, alterations or lack of maintenance. We shall in no event, be
liable for death, injuries to persons or property or for incidental, special or
consequential damages arising from the use of our products. To take
advantage of this limited warranty, please reach out to our Harvey's
customer service center. After examination, we will repair or replace the
product or any part(s) covered under this warranty due to defective
workmanship or material(s) during this warranty period.
3. Application
The Universal Roller Guide is used to assist in holding the workpiece during
cutting.
It is intended to be used in conjunction with a table saw, bandsaw, sander
or shaper which is equipped with the T-slot (Width of top and bottom: 3/4"
and 1"; Depth: 3/8").
The workpiece can be locked effectively even with slightly uneven edges.
1
Werbung
