Iberital New Installations- Und Betriebshandbuch Seite 51

IBERITAL
2.3.2. Programming the electronic pre-brew (not available on all models)
The control unit has a function called 'pre-brew'. Pre-brew can be enabled or disabled. If your machine has a visual
display, it will be possible to carry out this action via an option on the display. If it does not have a display, the function
is performed in the following manner:
To enable pre-brew, switch off the machine's main switch and press the button 1 espresso on the left button pad (group
1), keep it pressed and set the main switch to position 1 or 2, either will do, and the 1 espresso LED will light up.
Release the button and set the switch to zero (OFF) and then set it in the working position (position 2).
Iberital IB7
New Iberital / Expression Pro
To disable pre-brew, set the machine's main switch to zero (OFF) and press the button 1 coffee, keep it pressed and set
the main switch to position 1 or 2, either will do, and the 1 coffee LED will light up.
Release the button and set the switch to zero (OFF) and then to position 2.
Iberital IB7
New Iberital / Expression Pro
2.3.3. Activating or deactivating pre-infusion for a long coffees using IB7 and Intenz
The pre-infusion function for the buttons for 1 espresso or 2 espressos can be activated or deactivated. Thus, when the
pre-infusion function is enabled, you can decide whether or not to use the pre-infusion function with these buttons.
To activate and deactivate the pre-infusion function, switch off the machine's main switch and simultaneously press and
hold the buttons for 1 espresso and 1 long coffee on the left button panel (group 1) and move the machine's main switch
to position 1 or 2 (it makes no difference which position you choose). The LED lights of both buttons will light up.
50
t1(on)
Iberital Intenz
Iberital VISTA
Iberital Intenz
Iberital VISTA
INSTALLATION AND OPERATION MANUAL
Iberital Tandem
Iberital Tandem