STEP 1: SET UP AS A HAMMOCK
1. Find a suitable place to attach the hammock. The distance between two trees should be 3 to 4 metres (see Fig. 2).
2. The suitable tree trunk diameter is between 10 and 30 cm. Make sure that the trunk is stable enough.
3. The suspension point should be approx. 1.2 metres from the ground.
4. The ground should be levelled.
STEP 2: ASSEMBLY
1. Wrap the strap around the tree (one or two wraps) and thread one end of the strap through the loop at the other end (see
Fig. 3).
2. Hook the carabiner of the hammock into the loops on the strap on both sides. Make sure that the hammock is taut (see Fig.
4).
3. To use the hammock as a hammock only, turn the mosquito net downwards (see Fig. 5).
Fig. 3
11
SET-UP AND USE
300 - 400 cm
Fig. 2
Fig. 5
Fig. 4