LD Systems ANNY 8 Bedienungsanleitung Seite 21

EFFECT (change value or status = turn encoder; confirm value or status change = press encoder)
FX TYPE
Selection of the effect type or
switching-off of the effect (OFF)
FX SENDS
Set the effect sends for the INPUT
1, 2, and 5 inputs
SYSTEM SETTINGS (SETTINGS)
Press the rotary-push encoder to access the main menu and then select the menu item SETTINGS
(coloured background) by turning the encoder. Press the encoder again to access the submenu and
select the desired submenu item by turning the encoder. Confirm your entry by pressing the encoder.
See the table below for information on the submenu items. In the submenu, select •MAIN MENU and
press the encoder to return to the main menu. In the main menu, select •HOME, press the encoder to
confirm the selection and return to the main display. The main display will automatically appear after
around 10 seconds of inactivity.
SMALL REVERB
LARGE REVERB
PLATE REVERB
DELAY
OFF
INPUT 1 0–100%
INPUT 2 0–100%
INPUT 5 0–100%
21