Create Kettle Studio Pro Bedienungsanleitung Seite 9

HEAT THE WATER AND KEEP IT WARM
1. Press the power button
2. Press the temperature adjustment button
Range: 40-90ºC in 10 sections.
3. Press the keep warm button
4. Press the power button
5. The kettle will start heating the water. The display will show the current temperature and the
indicators and will light up.
6. When the water reaches the desired temperature, the appliance will beep 3 times and the
heating indicator go out.
7. The kettle will enter keep warm mode. By default it will stay in this mode for 24 hours.
8. If you wish to exit the keep warm mode, press the off button
• Remove the plug from the wall socket, and allow the appliance to cool.
• Clean the kettle with a damp cloth. Never immerse the appliance in water. Never put the
appliance in a dishwasher. Make sure that the electrical connections do not become damp.
• If the interior of the kettle has become severely discoloured, then the best way to clean it is
with a damp cloth and a little caustic soda. After cleaning, rinse it very thoroughly.
WARNING: Never use corrosive or scouring cleaning agents or sharp objects (such as knives
or hard brushes) to clean the appliance.
• Before cleaning, make sure that the appliance is not connected to the power supply and
that it has cooled down.
D E SCALI N G
• Lime will be deposited on the inside depending on the hardness of the water. For this rea-
son the appliance must be cleaned at regular intervals.
1. Remove the plug from the wall socket, and allow the appliance to cool.
2. Fill the kettle with a vinegar solution to the MAX level, and bring to the boiling point.
3. Leave the kettle with the vinegar solution to stand for a couple of hours.
4. Empty the kettle, fill with clean water to the MAX level, and bring to the boiling point.
Empty the kettle. Repeat this process twice.
WARNING: Never use ammonia or other products to descale the appliance. These can be
injurious to your health. Use solely a vinegar solution, or special descaling agents available
from retailers.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of
waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment,
on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the
environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal
of the product by the user involves application of the administrative sanctions according to the laws.
. The display will show "100".
to set the desired temperature.
.
to start heating the water.
CLEANING AND MAINTENANCE
.
E NGLI SH
9