Herunterladen Diese Seite drucken

Create Kettle Studio Pro Bedienungsanleitung Seite 8

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26
1. Display
2. On/Off button
3. Keep warm button
4. Temperature control button
5. Heat water indicator
6. Keep warm indicator
B E F ORE FI RST USE
• Remove all packaging and any labels from the product.
• For initial deep cleaning, perform two complete water boiling cycles and discard the water.
This will help to remove any impurities resulting from the manufacturing process.
• Never exceed the 'MAX' line that you can see on the inside of the kettle.
HOW TO BOIL WATE R
1. Place the appliance on a flat surface.
2. Press the button on the top of the handle to open the lid.
3. Fill the kettle with the required amount of water. Observe the water level indicator and never
exceed it.
CAUTION: Make sure that water does not splash on the base.
4. Close the lid.
5. Place the kettle on the base. Plug in the power cord. Press the power button
will show '100'.
6. Press the power button
7. The kettle will start heating the water. The display will show the current temperature and the
indicator will light up.
8. When the water reaches the temperature of 100ºC, the appliance will beep 3 times and the
indicator will turn off.
9. The kettle switches off automatically when the water is already boiling. Unplug the kettle
from the mains.
10. Always keep the lid closed when pouring water into any container.
CAUTION: Be careful not to touch the hot water. It may cause burns.
HEAT TH E WATE R TO T H E DE SIRE D T E M P E R AT U R E
1. Press the power button
2. Press the temperature adjustment button
Range: 40-100ºC in 10 steps.
3. Press the power button
4. The kettle will start heating the water. The display will show the current temperature and the
indicator will light up.
5. When the water reaches the desired temperature, the appliance will beep 3 times and the
indicator will turn off.
E NGL I SH
8
CONTROL PANEL
INSTRUCTIONS FOR USE
again to confirm the temperature.
. The display will show '100'.
to set the desired temperature.
again to confirm the temperature.
1
2
3
4
5
6
. The display

Werbung

loading

Verwandte Produkte für Create Kettle Studio Pro