VEVOR B58 Benutzerhandbuch Seite 7

Temperature control
·Power Supply: connect to DC 12V/24V or AC 100-240V power (using
dedicated adapter).
·Display Screen Initialization: After powering on, the digital display is
fully on for one second, and then displayed normally. The default is the last
memory function. In standby state, the temperature of the display "
bright.
·Power ON/OFF: press
·Temperature Setting: under the running state,press▲to increase
temperature,and press▼to decrease temperature;keep pressing▲or▼to
adjusting the temperature quickly.The setting will be saved automatically
after stopping operating for three seconds.
Temperature setting range:-20~20℃(-4~68℉)
·Temperature Unit Setting: under the running state,long press▲▼at the
same time for three seconds to switch Celsius or Fahrenheit.
·Cooling Mode: under the running state,press
cooling)and ECO(Energy saving Mode).(*Factory setting is MAX.)
·Battery Protection Mode: under the running state,long press
seconds until screen flashes,then press
Function and operation
ON/ OFF
Display screen
Large box
to switch ON/OFF.
Refrigeration
indicator lamp
SET Small box
to switch MAX(fast
again to select protection mode
- 6 -
USB
Temperature control
" is
or three