Safety Measures - 1Control Dory Kurzanleitung

2 - SAFETY MEASURES

Interference
Electromagnetic interference can lead to sub-optimal performance of any wireless device, including DORY.
Accessories and batteries
Use only indicated accessories and batteries.
Waterproof
DORY is not waterproof.
Keep the instructions
Please keep all instructions and paper documents included in the packaging for future reference.
3 - SAFE USE
Please only use batteries indicated in this guide. The use of any other type of battery may cause damages
even to the device including battery leakage, overheating, explosion or fire. The liquid released by the batteries
is corrosive and can be toxic. It could also cause damage to eyes and skin and is extremely dangerous if
ingested.
In case the liquid of the battery should come into contact with the eyes, wash well with a lot of water, do not rub
your hands and head immediately to the hospital.
• Do not subject the device to throws, shaking or bashing.
• Do not place the device and/or batteries in a microwave or any other high pressure device.
• Do not use the device in areas containing explosive gas: it may not work or catch fire.
• Do not place the device on high temperature surfaces: it may not work correctly.
• Place the device out of children's reach.
1Control DORY is a wireless transmitter. Although it conforms to all applicable norms and regulations and it is
CE marked, like any wireless device, 1Control DORY may interfere with some electronic and medical devices:
please abide by the applicable regulations.
Do not dismantle or modify the device, it could be damaged and not work correctly. Do not throw the device
into the fire, it could ignite and explode. Do not weld the connections of the device, it could cause leaks,
overheating, explosions or fires.
In the event of the device overheating, changing color or changing shape during use, please stop using it
immediately and ask for a substitute device. In the event of the device leaking or emanating bad odors, move it
away from sources of heat so as to avoid the risk of fires or explosions.
4 - GENERAL WARNINGS & REPLACING THE BATTERIES
Please dispose of used batteries according to local laws, separately from common waste. The 1Control DORY
device requires 2 3V CR2 lithium batteries.
When batteries need to be replaced, please use only brand new ones.
To replace the batteries
1. Remove the cover located on the internal electronic knob
2. Remove the batteries
3. Insert the new batteries, orienting the positive (+) and negative (-) ends as indicated on the labels affixed to
the housing.
Caution risk of explosion in case of replacement with incorrect type batteries. Use and replace old batteries
only with batteries of the proper size and type.
5 - LIMITED WARRANTY
The obligations of 1Control are limited to the repair or, at its own discretion, substitution of the product or the
20