Getting Started
HD-PLC Ethernet Adaptor Starter Pack
Power Line Communication
BL-PA100KT
Model No.
Set of 2 Adaptors (Master and Terminal)
Included items
HD-PLC Ethernet Adaptor (x2)
One adaptor is pre-configured as the
"master" adaptor, as indicated by the
MASTER seal affixed to the top of the
adaptor. The other adaptor is pre-
configured as the "terminal" adaptor.
Example of an integrated HD-PLC network
Wall outlet
Wall outlet
INTERNET
Additional adaptors can be added later, for a total of 16 adaptors including the master.
Terminal
Master
Router
Modem
See the Operating Instructions (found on the CD-ROM) for details.
This document is written to be used with the BL-PA100KT,
which is a pre-configured set of 2 adaptors.
No settings are required to use these adaptors.
Simply follow the instructions provided in this document.
Refer to the included Important Information document for
safety and other information. Refer to the Operating
Instructions (found on the CD-ROM) for reconfiguration and
troubleshooting information.
AC Cord (x2)
Order no.: PSJA1106Z
Connects each adaptor to the wall outlet.
- Getting Started (this document)
- Important Information
- CD-ROM
Network camera
Network printer
Hub
(Add-on adaptor)
PC
Wall outlet
Terminal
PC