Installation; Using The Mouse - Sandberg Wireless Keyboard Set 3 Bedienungsanleitung

1 Introduction
With the Sandberg Wireless Keyboard Set 3,
you get a cool keyboard and a great optical
mouse. No more cable clutter plus full freedom
of movement, due to both devices being linked
wirelessly to your computer via a tiny USB
receiver. Installation is fully automatic with no
need for software or device pairing. The
keyboard features a whole host of time-saving
hotkeys for selected programs plus playback of
media files.

2 Installation

2.1 Inserting the batteries
1. Insert two AA batteries into the mouse as
shown in Figure 1.
Figure 1
2. Insert two AAA batteries into the keyboard as
shown in Figure 2.
Figure 2
2.2 Connection
1. Insert the small USB receiver into an unused
USB port on your computer.
2. The devices are paired with each other during
the manufacturing process, so they link up
immediately.

3 Using the mouse

The mouse works like a normal mouse with left-
click, right-click and scroll up/down. The mouse
also offers the following extra functions:
1. A single press of the scroll wheel enables
scrolling simply by moving the mouse. Press
the scroll wheel again to deactivate the
function.
2.The scroll wheel on the left side of the mouse
allows you to navigate backwards and
forwards through websites visited in an
internet browser.
NOTE: The mouse has a built-in standby function
to save battery power. After about 10 minutes
of inactivity, the mouse goes into standby mode.
You can wake it up by pressing a button or
moving the scroll wheel. The mouse also turns
itself off if the USB receiver is removed from the
PC.
2