Film Type (Only In Film Scanner Mode) - Rollei PDF-S 240SE Bedienungsanleitung

Home
To leave the Edit menu and return to the Main menu use the
 /  keys to select the option "Home" and press the ENTER
key.
You can also change to the Main menu at any time using the
MODE key.
No image
If the last remaining image has been deleted in the Playback
mode, the display shows the adjacent image, indicating that
no photo exists. After several seconds the Multi Scanner
changes back to the Main menu.

6.5. Film type (only in film scanner mode)

Prior to scanning slides or negatives in the film scanner mode, the respective film type must be set.
Use the  /  keys in the Main menu to select the option "Film type" and confirm the selection by
pressing the ENTER key.
Negatives Film: this option allows colour negatives to be scanned in as a normal image.
Slide: select "slide" if you have inserted a slide holder with slides.
B&W: this setting is used for scanning black and white negative film.
Use the  /  keys to select the desired film type and confirm by pressing ENTER. The Multi Scan-
ner then changes directly to the capture mode.
20
ENTER