Adjusting Image Brightness And Colors; Scanning And Editing - Rollei PDF-S 240SE Bedienungsanleitung

6.3.2. Adjusting image brightness and colors

During the scan preview you have the option of changing the brightness value (EV) and also the
color value.
First press the ENTER button. Now the monitor will display the settings for the brightness and also
for the colors red (R), green (G) and blue (B). Choose the desired value by pressing ENTER and MODE
and change the settings by pressing  and  within the range of -2 to +2. To apply the changes
you have made, press the SCAN button.
The settings will apply separately to slides, negatives and photo prints and will be kept even if the
device has been switched off.

6.3.3. Scanning and editing

Press the SCAN key during the scan preview to scan the image. The image then appears in the edit
menu.
The symbols in the Edit menu have the following meaning:
Save: Save the recorded image.
Cancel: Cancel editing of the image.
Home: Back to the Main menu.
14
SCAN
Scanned image