EDIFIER S350DB Bedienungsanleitung Seite 6

Specifications
Poweroutput: R/L (treble): 15W+151M
R/L(mid-range andbass):
SW: 70W
Noise level: < 25dB(A)
Frequency r esponse range:
R/L: 160Hz-20KHz
Audioinputs: PC/Auxiliary/0ptical/Coaxial/Bluetooth
Note:the ratedtest frequency is asfollows:thetrebletest is 10KHz, m id-range andbasstest is 500Hz,the basstest is 80Hz.
The Bluetooth@ word mark and logos are registered
Bluetooth SIG, Inc. and any use of such marks by EDIFIER is under license.
Other trademarks
Qualcomm@
aptX
9
English
25W + 25W
trademarks
and trade names are those of their respective owners.
Qualcomm is a trademark of Qualcomm Incorporated,
in the United States and other countries, used with permission.
aptX is a trademark of Qualcomm Technologies International,
registered in the United States and other countries, used with
permission.
aptX is a product of Qualcomm Technologies International,
Problem
No sound
Cannot connect via Bluetooth
owned by
The S350DB
To learn more about EDIFIER, pleasevisit www.edifier.com
registered
For Edifierwarrantyqueries,pleasevisit the relevantcountrypage on www.edifier.com and reviewthe
sectiontitled WarrantyTerms.
Ltd.,
USAand Canada:service@edifier.ca
SouthAmerica: P lease visit www.edifier.com (English)or www.edifierla.com ( Spanish/Ponuguese) for local
contact information.
Ltd.
Solution
• Checkif the powerindicatorlight is ON
• Tryto turn up the volumeusingeitherthe mastervolume
control or remote control.
• Ensurethe audio cablesare firmly connectedand the
input is set correctlyon the speakers.
• Check if there is a signaloutput fromthe audiosource.
• Makesure the speakeris switchedto Bluetoothinput. If
it is in other audioinput modes,Bluetoothwill not connect.
Disconnect f rom any Bluetoothdeviceby pressingand
holdingthe volumedial in Bluetoothmode,then try again.
• EffectiveBluetoothtransmissionrangeis 10 meters;
pleaseensurethat operationis withinthe range.
• Try another Bluetoothdevicefor connection.
does not turn on • Checkif mainpoweris connected,or if the wall outlet is
switched on.
Troubleshooting
10
English