KBT rocli Gebrauchsanweisung Seite 2

INSTRUCTIONS FOR USE
SAFETY INSTRUCTIONS
1. Please keep this instruction sheet safely for future reference.
2. Inappropriate use or faulty application of the product is explicitly forbidden and absolves the manu-
facturer of all liability.
3. The assembly must be done by an adult. The use of the item is only allowed under continuous super-
vision by an adult. The product is meant for persons weighing up to 70 kg. WARNING! Not suitable for
children under 3 years - no specific precautions for toddlers. Risk of falling!
4. All elements of the item should be inspected reglarly for eventual wear.
5. This product meets to all security aspects of the European standard EN71. "WARNING! For family do-
mestic use only." Both indoors and outdoors.
6. The product must be installed onto a play frame that is suitable for this activity (eg a wooden play
tower). The assembly must be carried out in such a way that head, finger and clothing entrapments
are excluded. In order to prevent clothing entrapments during gliding, there should be no openings
around the platform between 3 mm and 25 mm. Pay special attention to the boards of the platform
onto which the slide is mounted.
7. When mounting or assembling the product attention should be given to minimum required distance
between the product and eventual obstacles : walls, fencing,... The distance should be min. 2000 mm.
8. In this safety area no hard, angular or pointed objects should be present. The surface underneath the
product should be flat and shock absorbing, so no asphalt, concrete or any other hard surface.
9. The product must be mounted onto a suitable platform (see point 6) and only in accordance with the
recommended platform height with a tolerance of approximately 5 cm (see notes at the rear of the
slide). The assembly must be done with 5 mm or 6 mm countersunk screws (screws not included). The
ground level surface must be sufficiently stable to avoid subsidence and to ensure that the slide does
not get damaged.
10. It is strongly advised not to lift the slide from the bottom after it has been fixed to the platform. This
will damage and break the slide.
11. To avoid the heating up of the product, do not orient the sliding surface towards the sun.
12. Sliding can cause a small electrostatic charge. This can be avoided by not wearing synthetic fabric
clothing and/or by regularly cleaning the surface of the slide with water and soap.
INSPECTION AND MAINTENANCE
The frequency of inspection and maintenance will vary with the type of equipment or materials used or
other factors (e.g. heavy use, levels of vandalism, coastal location, air pollution, age of equipment, ...).
If these checks are not carried out the activity toy could overturn or otherwise become a hazard. It is of
particular importance that the maintenance instructions be followed at the beginning of each season as
well as at regular intervals during the usage season.
Routine visual inspection (weekly to monthly)
- Always check that the bolts and nuts are securely fastened.
- Check the shock absorbing surface for objects that don't belong there.
- Check for missing parts.
- Check the equipment ground clearances.
Operational inspection (1 to 3 months)
- Check the stability of the construction.
- Check every part for excessive wear and replace when necessary.
Annual inspection (1 to 2 times per year)
- Check for rust and corrosion.
- Check every part for excessive wear and replace when necessary.
2
slide 'rocli'
EN