4
TECHNISCHE DATEN
Netzspannung:
Stromeinspeisung:
Leistung (hicoTHERM®-Heizfolie):
Leistung pro Laufmeter:
Sekundärspannung:
Max. Anzahl je Stromkreis:
Absicherung:
Schutzmaßnahme:
Nenngrenztemperatur:
Mindestverarbeitungstemperatur:
Minimaler Biegeradius:
Material:
Primärleitung Trafo:
Sekundärleitung Trafo:
Heizfolienabmessung, Breite:
Heizfolienabmessung, Länge:
Mindestlängen:
Max. Wärmedurchlasswider-
stand Rλ für Bodenbelag:
Symbolerklärung:
a)
b)
d)
e)
a) Entsorgungshinweis: Das Produkt darf nicht im allgemeinen Haus-
müll entsorgt werden! Recycling über Elektronikentsorgung der
kommunalen Sammelstellen.
b) Zulässiger Einbau als Deckenheizung (direkt wirkend)
c) Zulässiger Einbau als Fußbodenheizung (direkt wirkend)
d) Bedienungsanleitung lesen, Anleitungen befolgen
e) Schutzklasse II
12
230 V AC
1,3 A je Ringkerntrafo 300 W
60 W/m
(hicoTHERM® 60)
2
110 W/m
(hicoTHERM® 110)
2
220 W/m
(hicoTHERM® 220)
2
38 W / lfm (hicoTHERM® 60)
67 W / lfm (hicoTHERM® 110)
134 W / lfm (hicoTHERM® 220)
24 V
10 Heizbahnen
16 A
FI-Schutzschaltung 30 mA
+ 70 °C
+ 5 °C
R30 mm (ohne Filz)
R50 mm (mit Filz)
PET-Folie mit Carbonfasern
und Füllstoffen
1,5 mm
2
(zum Netz bzw. Regler)
1,5 mm
, max. 2 m Länge
2
59 cm (ohne Filz)
62 cm (mit Filz)
54 cm (netto Heizbreite)
2,25 m
1,0 m (hicoTHERM® 110/220)
2,25 m oder 2x 1,15 m (hicoTHERM® 60)
0,15 m
K/W
2
c)
4
TECHNICAL DATA
Mains voltage:
Power input:
Output (hicoTHERM® heating film):
Output per metre:
Secondary voltage:
Max. number per power circuit:
Fuse protection:
Protection measure:
Nominal temperature limit:
Minimum processing temperature:
Minimum bending radius:
Material:
Primary conductor / transformer:
Secondary conductor / transformer: 1,5 mm
Heating film dimensions, width:
Heating film dimensions, length:
Minimum lengths:
Max. heat transfer resistance
Rλ for floor covering:
Explanation of symbols:
a)
b)
d)
e)
a) Waste disposal instructions: the product may not be disposed of in
general household waste! It must be recycled via the electronics wa-
ste disposal system organised by the local authorities.
b) Approved for installation as a ceiling heating system (direct impact)
c) Approved for installation as an underfloor heating system (direct impact)
d) Read and follow the instructions
e) Protection class II
230 V AC
1,3 A per toroidal transformer
60 W/m
(hicoTHERM® 60)
2
110 W/m
(hicoTHERM® 110)
2
220 W/m
(hicoTHERM® 220)
2
38 W / m (hicoTHERM® 60)
67 W / m (hicoTHERM® 220)
134 W / m (hicoTHERM® 220)
24 V
10 sections of heating film
16 A
FI circuit breaker 30 mA
+ 70 °C
+ 5 °C
R30 mm (without felt)
R50 mm (with felt)
PET film with carbon fibres
and fillers
1,5 mm
2
(to the mains and/or controller)
, max. 2 m length
2
59 cm (without felt)
70 cm (with felt)
54 cm (net heating width)
2,25 m
1,0 m (hicoTHERM® 110/220)
2,25 m or 2x 1,15 m (hicoTHERM® 60)
0,15 m
K/W
2
c)