Using The Control Panel - Ninja Detect Tb201Eu Gebrauchsanweisung

USING THE CONTROL PANEL

NOTE: Press the dial to START or STOP any program. Turn to select.
POWER
Press to power the
unit on and off.
MANUAL
Adjustable speed for total
blending control.
PROCESSING MODE PROGRAMS
CHOP FUNCTIONS:
TB201: LARGE CHOP, SMALL CHOP, and MINCE
TB200: CHOP
Smart preset programs combine unique pausing patterns that chop for you. Press
MODE, turn the dial to select your desired program, then press START/STOP. The
program will automatically stop when complete. Press the dial again to stop the
program sooner. They do not work in conjunction with the BlendSense program or
Manual programs.
NOTE:
• Number of seconds is displayed for each program runtime.
• Functions vary by model. Refer to your Quick Start Guide for your model's specific configuration.
MANUAL PROGRAMS
Go manual for total control of your blending speed and textures. Press MANUAL, turn
the dial to select your desired speed, then press START/STOP. When selected, each
speed runs continuously for 60 seconds. Press the dial again to stop the program
sooner. Manual programs do not work in conjunction with the BlendSense program or
Processing Mode programs.
TB201: VARIABLE SPEED CONTROL (Speeds 1–10):
START SLOW (Speeds 1–3): Always start at low speed to better incorporate
ingredients and prevent them from sticking to the sides of the vessel.
DIAL UP THE SPEED (Speeds 4–7): Smoother blends call for higher speeds. Low speeds
are great for chopping veggies, but you'll need to ramp up for purées and dressings.
HIGH-SPEED BLENDING (Speeds 8–10): Blend until your desired consistency is reached.
The longer you blend, the better the breakdown and smoother the outcome will be.
TB200: LOW, MEDIUM, HIGH Speeds
NOTE:
• Once speed if selected, runtime will count up on the display in seconds.
• Functions vary by model. Refer to your Quick Start Guide for your model's specific configuration.
BLENDSENSE
Intelligent one-touch program
that senses your ingredients
and blends to perfection.
MODE
Preset processing programs that chop
for you.
PULSE
Operates only when PULSE
is pressed. Use short presses
for short pulses and long
presses for long pulses.
ninjakitchen.eu
27