ULTIMEA Apollo P20 Benutzerhandbuch Seite 2

5 Adjusting the projector
5.1 Please adjust the dial slowly to
bring the picture into focus
5.2 Adjust the Image Projected
On the Screen
Check the horizontal and vertical settings
of the projector till the image on the screen
is balanced.
7.2 Fire TV Stick Connection
How to connect the Fire TV stick
projector:
1. Connect the TV stick to power using the
USB cable.
2. Plug the TV stick to one the HD port on
the projector.
3. Select the HD option in the settings on
the projector.
The content of the Fire TV stick
displayed on the projection screen. Use the
Fire stick's remote to select and stream your
content.
fire TV Stick
IIIIIII I
I
image
6 Keystone
1. Adjust the keystone on the projector to
adjust the images shape.
2. Adjust the placement of the projector.
When the left side of the picture is wider,
move the left side of the projector corre-
sponding to the picture forward; when the
right side of the picture is wider, move the
right side of the projector corresponding to
the picture forward.
7.3 HD mode
to the Step 1: Connect the projector and device
with HD cable.
Step 2: Press and hold the Source button EJ
of the projector or remote control to enter
the input source interface.
Step 3: Select HDI or HD2 that you had
connected,
will be
key to exit and return to the main interface
of the projector.
7.5 AV mode
Step 1: Connect the projector and the
device with
Step 2: Press and hold the Source button a
of the projector or remote control to enter
the input source interface.
Step 3: Select AV, press 0K to enter, press
return key to exit and return to the main
interface of the projector.
o
o
correction
press 0K to enter, press return
HDI
HD2
O
AV
USB
the AV cable.
HDI
HD2
o
AV
USB
7 Input Source
7.1 Wired Connection to Devices
HD Cable TV Stick
Speaker Headphones DVD/VCD Media
7.4 USB mode
Step I: Connect the projector to the USB.
Step 2: Press and hold the Source button EJ
of the projector or remote control to enter
the input source interface.
Step 3: Select USB and press 0K to enter
the module interface (the same of home
page).
Step 4: Select the corresponding Movie,
Music, Picture and text modules of the file
type, and press 0K to enter the file interface
Step 5: Select the file to be played in the file
interface and press 0K to select play.
Step 6: Press the return key to exit and
return to the main interface of the projector.
8 BT settings
1. Power on and enter the projector's main
menu, select BT and click 0K button to
confirm.
2. Turn on BT and select the BT signal that
needs to be connected.
OTSetrqs
Enjoy your new projector!
USB
Player,etc