Royal Catering RC-PWW01 Bedienungsanleitung Seite 7

1. Plug in the three-pole plug, then turn on the power switch to start the heating tube and light.
2. Slowly add the chips into the machine from the top until the desired amount is reached.
3. The machine will maintain a constant temperature of 55°C ± 5°C. When the temperature
reaches 60°C, the thermostat relay will stop working. When the temperature falls below
50°C, the thermostat relay will start working again.
V. Cleanliness and protection
1. After use, clean the machine with a soft cloth to avoid damaging the surface. Avoid using
hard or abrasive materials.
2. Do not clean the machine with caustic or toxic substances, as they can damage the machine
and leave harmful residues.
3. The machine should not be washed with a high-pressure jet stream.
VI. Electric theory
FU: Insurance tube
K: Swich for warming light
D: Light
BW: Thermostatic relay
R: Warming pipe
WARNING: It's forbidden to add water into the machine while working.
VII. Troubleshooting guides
Sequence Problem
1 Light not on
Over
2
temperature
EN
Causes
Insurance tube burnt or not
plugged in tightly.
Broken thermostat
Possible remedies
1. Fasten the screw
connecting the wires
2. Change the light bulb or
the insurance tube
Change the thermostat
of