Create Retro Bedienungsanleitung Seite 7

Mode selection button
• Press once to switch between modes: Bluetooth, Auxiliary Input, USB Input.
LED mode indicator
• Blue : Bluetooth mode.
• Green: Auxiliary input mode.
LED charging indicator
• Red : The speaker is charging.
• When the battery is fully charged the LED stops emitting light.
BLUETOOTH MODE
• Turn on the product. By default the speaker enters Bluetooth mode when turned on. If not,
press the mode selection button repeatedly until Bluetooth mode is selected.
• Activate the Bluetooth connection on your device, then search and select the pairing name
"SPEAKER-RETRO-PRO".
• If the connection is successful, "Bluetooth connected" will sound on the speaker.
USB MODE
• Insert a USB flash drive that already has music stored on it. The device will automatically
switch to USB mode.
AUXILIARY INPUT
• Disconnect Bluetooth connections.
• Connect the device to a music source via an audio cable with a 3.5 mm jack to the AUX IN
interface.
CHARGE THE DEVICE
• The device contains a 3000 mAh rechargeable battery.
• Connect the USB Type-C power cable to the product and a suitable 5V/2A power source.
• Please fully charge the speaker before using it for the first time.
• 1x Speaker
• 1x USB-C Cable
• 1x Auxiliary Cable
• 1x Instruction Manual
MODES AND FUNCTIONS
CONTENT
7
E NGLI SH