Operation - Panasonic EY3741 Bedienungsanleitung

II.ASSEMBLY
• Be sure to charge the battery
pack.
For more information about how
to recharge the battery pack, see
the Operating Instructions for your
Panasonic rechargeable tool or
battery charger.
• Verify that the power ON/OFF
switch is in the "OFF" position.
• Verify that the electrical contacts
on the lantern and battery pack
are free of dirt.
1) Attach the battery pack to the
lantern.
• Slide the battery pack into position
until you hear it click securely into
place.
• To r e m o v e t h e b a t t e r y p a c k ,
depress the latch and slide it off of
the lantern.
Button
III.OPERATION
1) Set the power ON/OFF switch to
"ON".
01-33_EY3741_EU.indd 5 01-33_EY3741_EU.indd 5
When using the fluorescent lamp
• Avoid turning the fluorescent
lamp on and off repeatedly in a
short period of time. Doing so may
damage the lamp or short en its
service life.
• When using the fluorescent lamp
for the fi rst time, the area near the
electrodes may turn black, and
slight spots may form at the top
of the lit lamp. This is normal and
does not constitute a malfunction.
• When using the fluorescent lamp
in cold weather, the lamp may take
longer to reach its full brightness,
and there may be some fl icker. This
is normal and does not constitute
a malfunc tion.
• Avoid use in temperatures of 0°C
or below, which may cause the
fluorescent lamp to dim or not to
come on at all.
2) S e t t h e L A M P / L E D s e l e c t o r t o
"LAMP".
─ 5 ─
2010/01/21 18:25:18 2010/01/21 18:25:18