Workwear; Electric Safety Instructions - Eberth Pt1-R2000 Bedienungsanleitung

1.3.2. Workwear

•
Never wear jewelry such as rings, chains, watches, etc. when working with the device.
•
Do not wear clothing that can get caught in the appliance.
•
Special protective clothing such as safety shoes and special gloves are required.
•
Longer or long hair must be held together with a hairnet.
•
To avoid injuries on the face and especially the eyes, protective goggles must always be worn.

1.4. Electric safety instructions

Repairs to electrical parts, as well as electrical connections, must be carried out by licensed
electricians or by the manufacturer's repair service.
•
The device may only be used with a specified mains voltage.
•
Never use damaged or defective power cables or extension cables.
•
Plugs and coupling sockets on connecting cables must be made of rubber or other thermo-elastic
material or coated with it.
•
Always make sure that leads are not kinked, crushed or damp.
•
When using a cable drum, the cable must always be completely unrolled before use.
•
Protect all used cables from heat, oil or sharp edges.
•
Protective devices must never be bridged or operated.
•
Provisional electrical connections must not be used.
•
Only use sockets that have a circuit breaker. If this is missing, the device must be operated via a PRCD
switch.
•
If malfunctions occur, turn off the power, unplug the power cord, and contact Customer Service.
•
Never expose electric tools to rain, snow or moisture.
EN 2