Herunterladen Diese Seite drucken

Steiner Commander 7x50c Bedienungsanleitung Seite 21

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
MAINTENANCE AND CLEANING
Cleaning your binoculars:
Remove dust and loose dirt on the lenses with a brush. Then use only a soft, possibly damp
cloth to wipe the lenses. Failure to use a soft cloth can scratch the lenses. Wipe off salt water
with a damp cloth then use a dry cloth to wipe the lenses.
Care for the rubber armouring:
Binoculars resistant to water pressure may be rinsed under running water using liquid
soap. To close smaller hairline cracks that may be caused by UV radiation the rubber
armouring should be treated with Cockpit Spray or Nigrin Plastic Care.
Product Serial Number:
All STEINERs have their own serial number. This allows you to ascertain when your binocu-
lars were produced and it also provides a way to identify them in case of loss or theft. You
can find the serial number of your binoculars (depending on the model) at the front end of
the binoculars' axis, between the objectives
or in the objective lens
20
Types of batteries:
Commander 7x50c
Navigator 7x50c/7x30c
, on the underside of the binoculars' axis
18
.
CR 1/3 N
CR 1225
GB
18
19
19
20
21

Werbung

loading

Diese Anleitung auch für:

Navigator 7x50cNavigator 7x30c