Dangbei Freedo Bedienungsanleitung Seite 13

EN
4. Remote Control Pairing
ㆍTurn on the projector and wait for the Bluetooth pairing prompt on the screen.
ㆍBring the remote control within 10 cm / 0.33 ft of the projector.
Simultaneously press and hold the and keys.
ㆍ
Release the keys after the indicator light starts flashing.
ㆍ
ㆍWait until you hear two "beep" sounds, indicating a successful pairing.
10 cm
Indicator light
Press and hold for pairing *
* If the pairing is unsuccessful, repeat the above steps until
the remote control indicator light stops flashing.
11