Dangbei Freedo Bedienungsanleitung Seite 12

2. Power on
(For first-time use, please fully charge your projector using the provided adapter.)
2.1 When Using the Adapter
ㆍConnect the projector to the adapter and plug it into a power outlet.
ㆍPress the power button on the projector or the remote control to turn it on.
* Before pairing the remote control, the projector can only be turned on using the power button on the projector.
2.2 In Battery Mode (Unplugged)
ㆍPress and hold the power button on the projector for 2 seconds to turn it on.
* The power button on the remote control cannot be used to turn on the projector in battery mode.
3. Standby Mode / Power off
3.1 When Using the Adapter
ㆍPress the power button on the projector or the remote control to enter standby mode.
ㆍPress and hold the power button on the projector or the remote control for 2 seconds to turn it off.
3.2 In Battery Mode (Unplugged)
ㆍPress the power button on the projector or the remote control to turn it off.
* Standby mode is not supported in battery mode.
EN
10