Elitech RC-5 Bedienungsanleitung Seite 5

4. Start Logging
Press Button:
Press and hold the button
, LCD indicating the loggerstarts logging
Auto Start (RC-5+/TE only):
Immediate Start: The logger starts logging after removed from the
computer.
Timed Start: The logger starts counting after being removed from the
computer; it will start logging automatically
Note: If the icon keepsflashing, it means the loggerconfigured with start delay;it will start
logging ofter the set delaytime elapses.
5. Mark Events (RC-5+/TE only)
Double click the right button to mark current temperature
to 10 groups of data. After marked, it will be indicated by LogX on the
LC D screen(X meansthe marked group)
6. Stop Logging
Press Button": Press and hold the button
shows on the LCD, indicating the logger stops logging
Auto Stop: When the logging points reach the maximum
points, the loggerwill stop automatically
Use Software: Open ElitechLog software, click Summary menu, and
Stop Logging button.
Note: *Default stop is vio Press Button, if set 05 disobled, the button stop function will be
invalid; please open the ElitechLog software and click Stop Logging button to stop it.
for 5 seconds until the
after the set date/time
for 5 seconds until the icon
4
icon shows on the
and time, up
memory
EN